| The ESP
Furler is designed for the daysailer and coastal cruiser looking for
an easy-to assemble furler with an elegant design. Install a Harken
ESP Furler and trim safely from the cockpit when it blows and unfurl
instead of motoring when it’s light, for a great day of sailing.
To make assembly easier, Harken
offers top foils in five pre-cut lengths—no hacksaw required. An
adjustable bottom foil fine-tunes the unit. Foils slip over most
existing headstays without cutting the headstay, reducing set-up
time even more.
Easy Assembly and
Installation
Top foil offered in 5 sizes to fit headstay length requirements of
the boat. Bottom foil adjusts to fine-tune your final length—no
hacksaw required. Bottom foil adjusts to fine-tune length. Shackle
at the tack and head attach the sail to the furler, with sail shape
controlled by halyard tension. Marine eye and headstay wire pass
through the foil so there is no need to cut the wire during
installation.
Stands up to Elements
Spool is made from Hard Lube-anodized aluminum. Cover, flange, and
guard are molded from glass reinforced polymers for high strength.
Foils are clearcoat anodized for durability. The stainless steel
sail feeder is strong and durable.
Long or Short Leg
Kits Adjust Drum Height
Choose the long leg extension kit when using a turnbuckle with
swage, Norseman or Sta-Lok® terminals. Long legs raise the drum to
clear the anchor, reduce sail chafe, and increase visibility.
Removable clamp screws allow legs to pivot out of the way for easy
access to the turnbuckle. Choose the short leg extension kit
when the furler attaches directly to a marine eye at the bottom of
the stay. Short legs allow the sail to be closer to the deck. |
