Airmar Transducers

Airmar M260 50/200kHZ 1KW In-Hull Transducer - Navman

Brand: Airmar
Part Number: M260-6N
$1,085.00

Setting the In-Hull Standard
It’s true! Excellent performance can be achieved from an in-hull mounted transducer. The M260, Airmar’s 1 kW in-hull, is designed with Airmar’s exclusive Broadband Ceramic Technology. The 200 kHz element provides broadband performance resulting in higher-resolution without sacrificing sensitivity. Combined with a seven-element 50 kHz array, this in-hull has excellent deep-water detection. Because the M260 has narrow beams at both frequencies, separation of individual targets and the ability to distinguish between fish and the bottom makes finding fish easy.

Features
• Top-of-the-line broadband, in-hull transducer
• Recommended for solid fiberglass hulls
• Depth only
• Innovative tank design allows for bow-stern or port-starboard mounting
• Non-toxic anti-freeze (propylene glycol) is used to fill the tank
• Fiberglass resin is used to adhere tank to the hull
• Interfaces to any 600 W or 1 kW echosounder
• Boat Size: 8 m (25’) and up

A 6-pin female connector used by Navman equipment, including some that was later rebranded Northstar. Although this is physically the same connector as the -6G, the wiring in the cable is not identical. Also used by the Simrad NX.