These short cables enable a transducer to be used with equipment of
another brand. The image on the left shows the existing connector on the
transducer cable.
The image on the right shows the new connector, to plug into
the new sounder or fishfinder.
Do not use these adapters if you have a Mix and Match transducer - use the appropriate Mix and Match 600W or 1kW cable instead.
Allows Airmar Chirp to be connected to a Raymarine CP450C, CP470, CP570 Chirp echosounderAirmar’s Ch..
8 Pin Transducer to 12 Pin sounder adpater cable, MFG# 010-12122-10, for use with XID transducers...
Connect a compatible bare wire transducer to a Garmin 12-pin sounder connector with this wire block ..
Adapter box that enables Garmin 6-pin transducers to be used with Garmin
blue 8-pin equipment. Can..
Airmar CHIRP transducers are made with cables ending in a bare wire
connection.
Some ..
Gemeco 10 Conductor In-Line Splice and Furuno 10F pigtail...
Airmar CHIRP transducers are made with cables ending in a bare wire
connection.
Some ..
Splice Kit for Lowrance/Simrad single-band CHIRP transducers, with blue 7-pin connector..
Splice Kit for Lowrance/Simrad non-CHIRP transducers, with blue 7-pin connector..
Allows use of compatible transducer with sounder using Navico blue connector. Connect with terminal ..
Converts Furuno 10-pin Triducers and depth/temperature transducers to Garmin GSD22 requiring depth, ..
3 ft, 10-pin pigtail. Replacement connector for all 10-pin Furuno transducers...
Furuno pigtail adapter cable. 12-Pin Furuno Transducer connector to bare wires. 1m..
Connects Airmar bare wire, dual frequency, transducers to Navico sounders which require the 9-Pin Xs..
For Simrad and Lowrance 9 pin sounders...
Showing 1 to 15 of 15 (1 Pages)