Comnav Autopilot Accessories


Comnav RAI Rudder Angle Indicator
The analog rudder angle indicator is a backlit 76mm (3in) gauge displaying the actual position of a ..
Comnav CT2 Drive Box (for Reversing DC Motors)
ComNav CT2 Drive Box are specifically designed to connect Comnav 1001, 1101, 1201, and 2001 autopilo..
Comnav Stand Alone Rudder Angle Indicator System
Complete single station RAI System typically used on vessels that do not have a ComNav autopilot or,..
Comnav CT3 Drive Box (for Split Field Reversing DC Motors)
ComNav CT3 Drive Box is specifically designed to connect ComNav autopilots to 3-wire split field DC ..
Comnav Fluxgate Compass for 1420
Specifically designed for ComNav Autopilots, the ComNav Fluxgate Compass senses the earth's magneti..
Comnav Fluxgate Compass for 1001/2001
Specifically designed for ComNav Autopilots, the ComNav Fluxgate Compass senses the earth's magneti..
Comnav Fluxgate Compass for P2/P3
Specifically designed for ComNav Autopilots, the ComNav Fluxgate Compass senses the earth's magneti..
Comnav Rudder Follower Medium Duty - Does not include linkage
Waterproof construction with transducer life rated to over 50 million rudder movements. It is suit..
Comnav Rudder Follower Linkage - Medium Duty
The rudder linkage is self-aligning, self lubricating, corrosion resistant and easily adjustable to ..
Comnav Rudder Follower Linear Feedback
The linear feedback works with all ComNav Autopilots except the 2001. The Linear Feedback uses a sim..
Comnav 10 Ft Cable for Sin/Cosine Interface
Interface cable for Comnav 1000/2000 series autopilots and Sin/Cosine box...
Comnav CT4 AC Interface Box (for 115-220V AC Solenoid Valves)
The ComNav CT4 is used in situations with the steering interface that has 115 or 220VAC solenoids...
Comnav CT5 Interface Box (for 2 Speed Pumpsets)
The ComNav CT5 Drive Box is used to connect ComNav Autopilots to vessels using two speed (dual rate)..
Comnav Magnetic Compass Sensor 12KHZ
The ComNav Magnetic Compass Sensor detects the position of the compass card of an externally gimball..
Comnav Sin/Cosine Interface Box
The ComNav Sine-Cosine Interface Box allows an NMEA 0183 compass to be used with an autopilot that c..
Comnav Z-Drive Isolation Amplifier (One Channel)
The ComNav Z-Drive Isolation Amplifier module (one or two channel) provides total galvanic isolation..
Showing 1 to 16 of 17 (2 Pages)