Harken

Harken 40mm Protexit Exit Block

Brand: Harken
Part Number: 1202
$118.95

When you race HARD, and you rip through as many hoists and douses as we do sailing W-L legs all the time, you should expect to start wearing through the sideplates of your halyard exit block right? Wrong! Thanks to Harken Protexit™ blocks, wear from side angle loading is not inevitable. Protexit’s all-aluminum, wear-resistant housing carefully ushers line in and out no matter the angle. There’s more: Protexit blocks offer higher working loads than any small boat exit blocks we’ve ever made. Protexit aluminum sheaves rotate on sleeve bearings with Delrin® sideload balls so they don’t deform in extreme conditions, while reducing wear on the halyard, too.

Sheave Ø (mm)40 mm
Sheave Ø (in)1 9/16 in
Length (mm)107 mm
Length (in)4 3/16 in
Weight (g)74 g
Weight (oz)2.6 oz
Maximum line Ø (mm)8 mm
Maximum line Ø (in)5/16 in
Fasteners (mm)6 FH mm
Fasteners (in)1/4 FH in
Fastener spacing (mm)75 mm
A (mm)19.7 mm
B (mm)59.2 mm
Maximum working load (kg)400 kg
Maximum working load (lb)880 lb
Breaking load (kg)800 kg

Breaking load (lb)1764 lb