Harken

Harken 50mm Protexit Exit Block

Brand: Harken
Part Number: 1203
$136.95

When you race HARD, and you rip through as many hoists and douses as we do sailing W-L legs all the time, you should expect to start wearing through the sideplates of your halyard exit block right? Wrong! Thanks to Harken Protexit™ blocks, wear from side angle loading is not inevitable. Protexit’s all-aluminum, wear-resistant housing carefully ushers line in and out no matter the angle. There’s more: Protexit blocks offer higher working loads than any small boat exit blocks we’ve ever made. Protexit aluminum sheaves rotate on sleeve bearings with Delrin® sideload balls so they don’t deform in extreme conditions, while reducing wear on the halyard, too.

Sheave Ø (mm)50 mm
Sheave Ø (in)1 15/16 in
Length (mm)117 mm
Length (in)4 5/8 in
Weight (g)128 g
Weight (oz)4.5 oz
Maximum line Ø (mm)12 mm
Maximum line Ø (in)1/2 in
Fasteners (mm)6 FH mm
Fasteners (in)1/4 FH in
Fastener spacing (mm)90 mm
A (mm)23.3 mm
B (mm)71.5 mm
Maximum working load (kg)800 kg
Maximum working load (lb)1760 lb
Breaking load (kg)1600 kg

Breaking load (lb)3528 lb