Harken

Harken 30mm Protexit Exit Block

Brand: Harken
Part Number: 1200
$87.95

When you race HARD, and you rip through as many hoists and douses as we do sailing W-L legs all the time, you should expect to start wearing through the sideplates of your halyard exit block right? Wrong! Thanks to Harken Protexit™ blocks, wear from side angle loading is not inevitable. Protexit’s all-aluminum, wear-resistant housing carefully ushers line in and out no matter the angle. There’s more: Protexit blocks offer higher working loads than any small boat exit blocks we’ve ever made. Protexit aluminum sheaves rotate on sleeve bearings with Delrin® sideload balls so they don’t deform in extreme conditions, while reducing wear on the halyard, too.

Sheave Ø (mm)30 mm
Sheave Ø (in)1 3/16 in
Length (mm)75 mm
Length (in)2 15/16 in
Weight (g)37 g
Weight (oz)1.3 oz
Maximum line Ø (mm)8 mm
Maximum line Ø (in)5/16 in
Fasteners (mm)5 FH mm
Fasteners (in)#10 FH in
Fastener spacing (mm)57 mm
A (mm)18.2 mm
B (mm)45.7 mm
Maximum working load (kg)250 kg
Maximum working load (lb)550 lb
Breaking load (kg)500 kg

Breaking load (lb)1103 lb