Harken Hi-Load Smallboat Furling System

Harken® Small Boat furling systems allow the trailerable cruising or dinghy sailor to set and furl the jib from the cockpit. An optional hoistable ball bearing halyard swivel can be installed on your headstay so you can raise or lower the sail without removing the headstay. Swivels are independent of the headstay, allowing you to tension the luff separately from the mast rake.

Description = Hi-Load furler   
Distance between pins (in) = 2.5
Distance between pins (mm) = 64 
Drum dia. (in) = 2.875
Drum dia. (mm) = 73 
Line dia. (in) = 5/32 
Line dia. (mm) = 4  
Jaw width (in) = 5/16 
Jaw width (mm) = 8  
Max. luff wire dia. (in) = 40916
Max. luff wire dia. (mm) = 3  
Clevis pin dia. (in) = 1/4
Clevis pin dia. (mm) = 6  
Weight (oz) = 7.6
Weight (g) = 215
Max. working load (lb) = 950
Max. working load (kg) = 431
Use = Dinghies to 20' (6.1 m) and Ca