Harken Small Boat Furler Kit w/Hoistable Halyard Swivel

Harken® Small Boat furling systems allow the trailerable cruising or dinghy sailor to set and furl the jib from the cockpit. The hoistable ball bearing halyard swivel can be installed on your headstay so you can raise or lower the sail without removing the headstay. Swivels are independent of the headstay, allowing you to tension the luff separately from the mast rake.

Pin-to-pin length (in) = 2 1/2*
Pin-to-pin length (mm) = 64 
Drum (oz) = 2.875
Drum (g) = 73 
Line dia. (in) = 5/32 
Line dia. (mm) = 4  
Jaw width (in) = 5/16 
Jaw width (mm) = 8  
Max. luff wire dia. (in) = 5/32 
Max. luff wire dia. (mm) = 4  
Clevis pin dia. (in) = 1/4
Clevis pin dia. (mm) = 6  
Weight (oz) = 11.2 
Weight (g) = 318
Max. working load (lb) = 950
Max. working load (kg) = 431
* = Tang hole to tang hole