Harken Smallboat Cruising Furling System

Harken® Small Boat furling systems allow the trailerable cruising or dinghy sailor to set and furl the jib from the cockpit. An optional hoistable ball bearing halyard swivel can be installed on your headstay so you can raise or lower the sail without removing the headstay. Swivels are independent of the headstay, allowing you to tension the luff separately from the mast rake.

Use = Cruising boats to 25' (7.6 m)
Description = Cruising furler**
Distance between pins (in) = 4  
Distance between pins (mm) = 102
Drum dia. (in) = 4.1875
Drum dia. (mm) = 106
Line dia. (in) = 1/4
Line dia. (mm) = 6  
Max. luff wire dia. (in) = 3/16 
Max. luff wire dia. (mm) = 5  
Clevis pin dia. (in) = 5/16 
Clevis pin dia. (mm) = 8  
Weight (oz) = 22.8 
Weight (g) = 646
Max. working load (lb) = 2000 
Max. working load (kg) = 907
Jaw width (in) = 3/8
Jaw width (mm) = 10