Maretron’s products communicate over a Controller Area Network (CAN bus) using the National Marine Electronics Association’s NMEA 2000® protocol. The advantages of using CAN bus are numerous and include low wiring complexity with all components interconnected through a single cabling system. The reduction in wire over conventional systems is significant resulting in lower installation and maintenance cost and lower overall vessel weight. And since the individual products are connected to drop lines from the main trunk line, a single product failure doesn’t affect communication between other devices.
Micro/Mid Powertap Tee - FM (left)/5 Meter 4 Wire Power drop (bottom)/FM (right) A Powertap T..
Micro Termination ResistorsTermination Resistors are required on a NMEA 2000® network and are plac..
Micro Termination ResistorsTermination Resistors are required on a NMEA 2000® network and are plac..
Micro TeeA Tee is used to tap into the trunk line for adding a drop connection. The standard tee ..
Micro Bulk CableMicro bulk cable is primarily used as drop cable, but it can also be used as the ..
The Bulkhead Feed-Thru allows ease of installation through panels or bulkheads and establishes fu..
Micro Field-Attachable ConnectorField-attachable connectors allows you to make field connections to..
Micro Field-Attachable ConnectorField-attachable connectors allows you to make field connections to..
Micro Inline Termination ResistorThe inline terminator is used where the NMEA 2000® network is ter..
Micro Field-Attachable ConnectorField-attachable connectors allows you to make field connections to..
Micro Field-Attachable ConnectorField-attachable connectors allows you to make field connections to..
Mini Field-Attachable ConnectorsField-attachable connections allow you to make field connections to ..
Mini Field-Attachable ConnectorsField-attachable connections allow you to make field connections to ..
Showing 1 to 13 of 13 (1 Pages)