Schaefer Marine

Schaefer Double Jaw Toggles

Double Jaw Toggles are used with the same pin sizes as marine eyes and mechanical end fittings on 1 x 19 stainless wire. These type 316 stainless toggles permit proper ”universal” motion in rigging applications to help reduce wire, rod and end fitting fatigue. Extra deep slot allows use in split masthead sheave boxes. Toggle may be inverted to accept weldment tabs for chainplates.

Schaefer Double Jaw Toggle, 1/2" Pin
Pin Dia. 1/2" (13 mm), Max. Wire 9/32" (7 mm), C/C 2" (51 mm), Strap W At Pin 1-1/4" (32 mm), Stra..
Schaefer Double Jaw Toggle, 1/4"(6mm) Pin
Pin Dia. 1/4" (6 mm), Max. Wire 1/8" (3 mm), C/C 1-1/16" (27 mm), Strap Width At Pin 5/8" (16 mm),..
Schaefer Double Jaw Toggle, 3/4" Pin
Pin Dia. 3/4" (19 mm), Max. Wire 7/16" (11 mm), C/C 3" (76 mm), Strap W At Pin 1-3/4" (44 mm), Str..
Schaefer Double Jaw Toggle, 3/8" Pin
Pin Dia. 3/8" (10 mm), Max. Wire 3/16" (5 mm), C/C 1-1/2" (38 mm) Strap Width At Pin 1" (25 mm), S..
Schaefer Double Jaw Toggle, 5/16" Pin
Pin Dia. 5/16" (8 mm), Max. Wire 5/32" (4 mm), C/C 1-1/4" (32 mm), Strap Width At Pin 3/4" (19 mm)..
Schaefer Double Jaw Toggle, 5/8" Pin
Pin Dia. 5/8" (16 mm), Max. Wire 3/8" (10 mm), C/C 2-1/2" (64 mm), Strap W At Pin 1-1/2" (38 mm), ..
Schaefer Double Jaw Toggle, 7/8" Pin
Pin Dia. 3/4" (19 mm), Max. Wire 7/16" (11 mm), C/C 3" (76 mm), Strap W At Pin 1-3/4" (44 mm), Str..
Showing 1 to 7 of 7 (1 Pages)