Mixing and Reduction
Spray: Mix by volume one part Awlgrip Topcoat Base Component with
one part Awlcat #2/G3010 Spray Converter to a smooth, homogenous mixture.
Reducer addition level required to achieve 14 seconds viscosity (DIN4 or
equivalent) varies color to color. For standard conventional spray
application this can be attained by adding up to 25% reducer using the
correct spray reducer(s) appropriate for conditions. Example: (8 oz. Base,
8 oz. G3010, 4 oz. Reducer.) If a 25% reduction is used, overall mix is
1:1:1⁄2 by volume. Clear coats and painting in high temperature
conditions may require additional reduction.
Brush/Roll: Mix by
volume two parts Awlgrip Topcoat Base Component with one part Awlcat
#3/H3002 Brushing Converter until one smooth, homogenous mixture is
obtained. Reduce 10–33% with T0031. Overall mix is 2:1:1⁄3–1 by
volume. Example: 8 oz. Base, 4 oz. H3002, 1.3 - 4 oz. T0031.
Fast Evaporating Reducer for Spray Applied Urethane TopcoatsUse T0001 in Awlgrip/Awlcraft 2000/Awlcr..
Fast Evaporating Reducer for Spray Applied Urethane TopcoatsUse T0001 in Awlgrip/Awlcraft 2000/Awlcr..
Standard Reducer for Spray Applied Urethane TopcoatsUse T0003 in Awlgrip, Awlcraft 2000 and Awlcraft..
Standard Reducer for Spray Applied Urethane TopcoatsUse T0003 in Awlgrip, Awlcraft 2000 and Awlcraft..
Brushing Reducer for Epoxy Primers and Urethane TopcoatsUse T0031 in Awlgrip Topcoats, 545 Epoxy Pri..
Brushing Reducer for Epoxy Primers and Urethane TopcoatsUse T0031 in Awlgrip Topcoats, 545 Epoxy Pri..
Hot Weather Reducer for Urethane TopcoatsUse T0005 in Awlgrip, Awlcraft 2000 and Awlcraft SE Topcoat..
Showing 1 to 7 of 7 (1 Pages)