Maretron TMP100 Temperature Module
TMP100 requires configuration. (Maretron DSM150, DSM250, USB100, or IPG100 needed to configure)
Maretron's TMP100 measures the temperature for up to 6 temperature probes and reports the information over an NMEA 2000® network. The TMP100 supports up to 4 thermistor probes and 2 high temperature thermocouple probes. Optional thermistor probes (-20°C to 80°C or -4°F to 176°F) cover a wide range of applications including cabin air temperature, engine room air temperature, refrigerator/freezer temperature, under bolt temperature (inverters, charges, pumps, motors, etc.), tank temperatures (live well bait, hot water, etc.), and air duct temperatures. The optional thermocouple probes (0°C to 900°C or 32° to 1652°F) are used to measure Exhaust Gas Temperature (EGT) as part of a comprehensive fuel management system.
- Six external temperature probes are measured and broadcast Over NMEA 2000® network
- Four channels for thermistor probes and two channels for high temperature thermocouple probes
- Wide variety of applications supported with optional temperature probes