Typical Boat Size:
Monohulls: length 37 - 50 ft (11.3 - 15.2 m); mainsail area under 600 ft2
(56 m2)
Multihulls: length 30 - 40 ft (9.1 - 12.2 m); mainsail area under 500 ft2
(46 m2)
The one-piece solid aluminum construction is lightweight and strong. Cars are easily removed from the track by freeing the screwpin endstop and sliding them off. Both CB and Slider Battcar systems use the same track. Mix and match sliders and ball bearing cars for optimal performance and cost.
Slider Cars
Slider Battcars offer a lightweight, cost effective way to raise, reef,
and douse mainsails. Hardkote-anodized aluminum cars slide on low-friction
plastic inserts. The compact car size translates into reduced weight
and stack height.
Description = Headboard car assembly Weight (oz) = 10 Weight (g) = 269Width (in) = 1.375Width (mm) ..
A Harken® Battcar system along with full-length battens helps raise,
douse, and reef with ease and..
A Harken® Battcar system along with full-length battens helps raise,
douse, and reef with ease and..
A Harken® Battcar system along with full-length battens helps raise,
douse, and reef with ease and..
Description = Track System A CB Mast 80 3/4"Length - (in) = 80.75Length - (m) = 2.05&nbs..
Description = Track End Kit - System A CB FlMounting slugs/kit = 2 Weight (oz) = 0.52Weight (g) = 1..
Weight (oz) = .5 Weight (g) = 14 Mounting slugs/kit = 2 Description = Track End Kit - System A CB R..
Weight (oz) = 0.67Weight (g) = 19 Description = Track End Kit - System A CB WiMounting slugs/kit = 2..
Mounting slug length (in) = 40972Mounting slug length (mm) = 19 Mounting slug weight (oz) = 0.17Moun..
Description = Mounting Kit - System A RoundMounting slug length (in) = 40972Mounting slug length (mm..
Fits Mast Groove Gap Min. (in) = 7/16 Fits Mast Groove Gap Min. (mm) = 11 Fits Mast Groove Gap Max. ..
A Harken® Battcar system along with full-length battens helps raise,
douse, and reef with ease and..
Description = Flat mast groove/screwpin Track end length (in) = 8 Track end length (mm) = 203We..
Description = Track End Kit - System A SlideMounting slugs/kit = 3 Track end length (mm) = 8 Track..
Mounting slugs/kit = 3 Description = Track End Kit - System A SlideTrack end length (in) = 8 Track..
Showing 1 to 15 of 15 (1 Pages)